70.2K

Verified Solution

Link Copied!

2 Load and Movement Cost (10maris) The city of Liputtakes it's driving fiety very l tiny is rar g tirom 2 (mere to guar process than found in more the cities. All die first receive an in close certificate for kuning the tale of driving and safety standards. They must also spend at least take their driver's test and pass they we given a certificate and uso take this to one central municipal building where there we stations and tests before meeting an official Time to drive. The areas follow Sution - The drives their crew the driving to devem Amp Sution - The driver takes in eyes. With the certificate receives a sam Sutien-The driver's legal record is reviewed the driver's cordis clean the driver med at Station - The driver takes celine roles and safely to When drives per the testa slapens on the testing machine to place the certificate is to receive as Once all four stamps are received the driver can take the certificate other building to receiver's The layout see the first building is as follows: A B C D The 20 so the distance between the stations and we will come the more is in fact The building is always very busy since it is the only location to service the entire city Drivers tend to want to get the testing out of the way it. A typical day shows the following more new drives take who they the building The chart shows the movement of people between stations in the column bostons in the w For cumple, people move from time to Station, 100 people move from Statice At 19 from BD A Call the movement of the current layout. Note that the cost is not edin menetary terms. The cost is the distance (marts Create a better layout and the new movements. The Layout must be linear What is the movement cost savings 6 marks) Hint: Cost does not always have to be stated in terms of dollars. Distance can be the col. A hun for this question is as follows: 20 people move from And 100 people one from AtoC, and distance between these is foet and that was all the movement (AB)+( AC)=(20x5)+100 x 5= 100-500=610 feet To create a beti layat you move the states that have the most moment between them clostor beside each other Load and Movement Cost (10 marks) The city of Lispat takes it's driving safety very seriously. First time drivers must go through a more rigorous exam process than found in most other cities. All drivers must first receive an in class certificate for learning the rules of driving and safety standards. They must also spend at least 20 hours with an instructor for driver training. Once they take their driver's test and pass they are given a certificate and must go take this to one central municipal building where there are stations and tests before receiving an official license to drive. The stations are as follows: Station A - The driver shows their certificate for passing the driving test and receives an A stamp. Station B - The driver takes an eye test. With a pass, the Certificate receives a B stamp. Station - The driver's legal record is reviewed. If the driver's record is clean, the driver receives a stamp. Station D-The driver takes an online rules and safety test. When a drives passes the test a slot opens on the testing machine to place the certificate into to receive a D stamp. Once all four stamps are received, the driver can take the certificate to another building to receive an official driver's license. The layout for the first building is as follows: A B C D |---20------20 -------20---- The 20 refers to the distance between the stations and we will assume the measure is in feet. The building is always very busy since it is the only location to service the entire city. Drivers tend to want to get the testing out of the way first. A typical day shows the following movement new drivers take when they enter the building The chart shows the movement of people between stations in the column to stations in the row. For example, 20 people move from Station A to Station B; 100 people move from Station A to C, 150 from B to D; etc. ABCD 2010 For example, 20 people move from Station A to Station B; 100 people move from Station A to C; 150 from B to D; etc. AL 20 100 | 150 das 15 D70 120 A) Calculate the movement cost of the current layout. Note that the cost is not measured in monetary terms. The cost is the distance. (4 marks) B) Create a better layout and the new movement cost. The layout must be linear What is the movement cost savings? (6 marks) Hint: Cost does not always have to be stated in terms of dollars. Distance can be the cost. A hint for this question is as follows: If 20 people move from station A to B and 100 people move from A to C, and distance between these stations is 5 feet and that was all the movement, the cost is: (A to B) + (A to C) = (20 x 5) + (100 x 5) = 100 + 500 = 600 feet. To create a better layout you move the stations that have the most movement between them closest or beside each other. 2. Load and Movement Cost (10 marks) The city of Lispat takes it's driving safety very seriously. First time drivers must go through a more rigorous exam process than found in most other cities. All drivers must first receive an in class certificate for learning the rules of driving and safety standards. They must also spend at least 20 hours with an instructor for driver training. Once they take their driver's test and pass they are given a certificate and must go take this to one central municipal building where there are stations and tests before receiving an official license to drive. The stations are as follows: Station A - The driver shows their certificate for passing the driving test and receives an A stamp. Station B - The driver takes an eye test. With a pass, the certificate receives a B stamp. Station C - The driver's legal record is reviewed. If the driver's record is clean, the driver receives a C stamp. Station D -The driver takes an online rules and safety test. When a drives passes the test a slot opens on the testing machine to place the certificate into to receive a D stamp. Once all four stamps are received, the driver can take the certificate to another building to receive an official driver's license. The layout for the first building is as follows: A | B | C | D |---20------20 --------20---- The 20 refers to the distance between the stations and we will assume the measure is in feet. The building is always very busy since it is the only location to service the entire city. Drivers tend to want to get the testing out of the way first. A typical day shows the following movement new drivers take when they enter the building, The chart shows the movement of people between stations in the column to stations in the row. For example, 20 people move from Station A to Station B; 100 people move from Station A to C; 150 from B to D; etc. ABCD 2010 B 150 15 das D70 120 A) Calculate the movement cost of the current layout. Note that the cost is not measured in monetary terms. The cost is the distance. (4 marks) B) Create a better layout and the new movement cost. The layout must be linear. What is the movement cost savings? (6 marks) Hint: Cost does not always have to be stated in terms of dollars. Distance can be the cost. A hint for this question is as follows: If 20 people move from station A to B and 100 people move from A to C, and distance between these stations is 5 feet and that was all the movement, the cost is: (A to B) + (A to C) = (20 x 5) + (100 x 5) = 100 + 500 = 600 feet. To create a better layout you move the stations that have the most movement between them closest or beside each other

Answer & Explanation Solved by verified expert

See Answer